Shipping Container Conversions 30ft oxygen tank store - NHS
CS78344
Pricing
*Call For Delivery Costs
This container has been created as a key part of an important project for Somerset NHS Trust, to support patients in the hospital with respiratory viruses, including Covid.
The container has been converted to safely accommodate the storage of vital emergency oxygen tanks. For this purpose it must be highly secure, reinforced to support the weight of the tanks, well ventilated and free from any combustible materials. By fitting multiple vents and a steel floor plate we were able to ensure strength, security and safety. The cleats fitted to the top of the container are for an insulated roof cover to be fitted, in order to keep the container at a more consistent temperature all year round. Usually ply lining inside a container will do this job, but as plywood is a combustible material, external insulation on the roof is a good alternative.
The container has been converted to safely accommodate the storage of vital emergency oxygen tanks. For this purpose it must be highly secure, reinforced to support the weight of the tanks, well ventilated and free from any combustible materials. By fitting multiple vents and a steel floor plate we were able to ensure strength, security and safety. The cleats fitted to the top of the container are for an insulated roof cover to be fitted, in order to keep the container at a more consistent temperature all year round. Usually ply lining inside a container will do this job, but as plywood is a combustible material, external insulation on the roof is a good alternative.
CD Code CS78344
Features
Design
Special features
- Once-used 30ft shipping container
- Cut and shut to retain corner posts
- 8ft galvanised roller shutter door to end
- 14 x louvered aluminium vents
- Durbar steel floor fully seam welded over marine plywood
- Internal steel partition with double door
- 2 x horizontal support panels to walls of control room and cylinder store
- 2 x posts welded floor to ceiling to both sections
- 150mm diameter pipe sleeve
- Support cleats welded to both top rails externally
- Exterior repainted light grey
The design
As with any product, specification is subject to change without prior notification. You are advised to confirm current specification before buying.